How To Use It

The following information outlines what you should expect when using the LUMI™ IPL device for the first time. Even if you have previously used an IPL device, we suggest you read the following. Should you have any further questions, please contact our Customer Care Department.
Before Using LUMI™
Before using LUMI™, we strongly suggest that you read the user manual in its entirety (included in the LUMI™ packaging) to achieve the best results. Your skin must be shaved, completely clean and dry before using LUMI™. Also, make sure to remove all makeup, creams, and any other products you have applied to your skin.
During
The following areas are treated effectively with LUMI™:
- Legs
- Underarms and arms
- Back and shoulders
- Chest
- Bikini line
- Feet
LUMI™ should not be used on the head, face, and neck.
Once you have plugged in the device it will automatically turn on. Now you can select the appropriate intensity level. Once the level has been chosen, simply press the Start button, wait for the Ready light to illuminate (about 2.5 seconds), and begin treatment.
To ensure your safety, when using a new Disposable Lamp Cartridge, the device will automatically set the device to emit the first 50 pulses at the lowest intensity level. After 50 pulses it will allow you to increase the intensity up to level 3. After 300 pulses, the device will unlock levels 4 and 5. Once you have reached 500 pulses, you will be allowed to use any of the 6 intensity levels.

Place the Applicator evenly onto your skin and press the pulse button. If the Skin Tone Sensor determines that you have the appropriate skin tone, the unit will flash. Repeat this process, making sure to slightly overlap the treated areas.
After each flash, you may feel a mild sensation of warmth and tingling when treating more sensitive areas.

These are only a few of the areas that you can easily and effectively treat with EvoDerma LUMI™
After
After a treatment session with LUMI™, you will see hair fall out for a period of up to two weeks. This is the body's normal response as it discharges dead hair. For optimal results, you should always hydrate your skin after using LUMI™. This is why we have created the LUMINANTE™ Ultra Soothing and Moisturizing After Treatment Lotion, which is specifically made to provide you with thorough hydration after each treatment.
To achieve maximum hair reduction, it is suggested that you treat the desired area every two weeks.
Recommendations
Before using LUMI™, make sure to follow the guidelines below and, if you have any questions or concerns, please refer to our FAQ section or contact our Customer Care Department
- Please read the LUMI™ safety manual and follow the instructions correctly;
- Use the Skin Tone Chart to determine if LUMI™ is suited for your skin;
- Beautiful skin starts with healthy skin. EvoDerma recommends that you adequately protect your skin from the sun (SPF 50 or higher) at least 4 weeks before and after any treatment.






